月刊
ISSN 1000-7229
CN 11-2583/TM
电力建设 ›› 2013, Vol. 34 ›› Issue (4): 67-70.
• 发电技术 • 上一篇 下一篇
郭志海,邓彪
出版日期:
作者简介:
GUO Zhihai, DENG Biao
Online:
摘要:
探讨配置100%汽动给水泵的超临界汽轮机用汽动给水泵进行深度滑参数停机的可行性,论述深度滑参数停机的特点及操作与安全措施。试验表明,深度滑参数停机是可行的,整个停机过程蒸汽温度、金属温降、胀差、热膨胀下降速度均匀,轴承振动安全、可控;1次深度滑参数停机能减少盘车时间4天,节约厂用电17.3万kW·h,增加发电量10万kW·h。
关键词: 超临界汽轮机, 深度滑参数停机, 调节级后金属温度, 温降速度
Abstract:
The feasibility that turbine-driven feed pump is used for the deep sliding parameter shutdown of supercritical steam turbine equipped with 100% turbine-driven feed pump is discussed, as well as the characteristics, operation and safety measures of deep sliding parameter shutdown are investigated. The results show that the deep sliding parameter shutdown is feasible, in which the descent speed of steam temperature, metal temperature, differential expansion and thermal expansion are uniform, and the bearing vibration is safe and controllable. The deep sliding parameter shutdown can reduce barring time by 4 days, save auxiliary power by 17.3×104 kW·h, and increase power generation by 10×104 kW·h
Key words: supercritical steam turbine, deep sliding parameter shutdown, metal temperature after control stage, temperature dropping speed
郭志海,邓彪. 超临界汽轮机深度滑参数停机探索[J]. 电力建设, 2013, 34(4): 67-70.
GUO Zhihai, DENG Biao.
0 / / 推荐
导出引用管理器 EndNote|Ris|BibTeX
链接本文: https://www.cepc.com.cn/CN/
https://www.cepc.com.cn/CN/Y2013/V34/I4/67
[1]司派友,左川.联合循环机组汽轮机深度滑参数停机[J]. 热力发电,2009(6):34-36.[2]袁斌,张月.600 MW机组滑参数停机操作及分析[J].锅炉制造,2008(4):25-28.[3]陈凡夫,冯庭有.百万千瓦机组新型组合快速冷却技术[J].中国电力,2012, 45(3):46-49. [4]王永康.600 MW超临界机组滑参数停机探讨[J].华东电力,2008(2):28-31.[5]曾贤,郑桂波.东方600 MW超临界机组滑参数停机分析[J].电力安全技术,2008(8):34-37.[6]孙伟鹏,江永.百万千瓦机组深度滑参数停机试验及其研究[J].热电技术,2012(2):33-36.[7]郭萌.火电机组滑参数停机过程中的汽温控制[J].电力建设, 2004,25(4):48-51.[8]刘丽.CLN350-24.2/566/566型汽轮机启动运行维护部分说明书[G].哈尔滨:哈尔滨汽轮机有限公司,2008.[9]刘登福.CLN350-24.2/566/566型汽轮机主机说明书[G].哈尔滨:哈尔滨汽轮机有限公司,2008.[10]邓彪.集控主机运行规程[G].海南:华能东方电厂,2010.