• CSCD核心库收录期刊
  • 中文核心期刊
  • 中国科技核心期刊

电力建设 ›› 2020, Vol. 41 ›› Issue (3): 93-99.doi: 10.3969/j.issn.1000-7229.2020.03.012

• 交直流配电网规划设计与调度控制 • 上一篇    下一篇

交直流配电网典型形态特征对比与应用模式

韩俊1,袁栋2, 谢珍建1,何晋伟3, 刘利国2, 杜渐1, 蔡超1   

  1. 1. 国网江苏省电力有限公司经济技术研究院, 南京市 210008;2. 国网江苏省电力有限公司,南京市 210024;3. 智能电网教育部重点实验室(天津大学),天津市 300072
  • 出版日期:2020-03-01
  • 作者简介:韩俊(1985),男,博士,高级工程师,主要从事配电网规划及相关理论应用方面的研究工作; 袁栋(1981),男,学士,高级工程师,主要从事配电设备运维检修工作; 谢珍建(1980)男,博士,教授级高级工程师,主要从事电力系统规划方面的研究工作; 何晋伟(1983),男,教授,博士生导师,主要从事大功率电力电子变流技术、能量路由和微电网、新能源发电和分布式电源、电能质量等方面的研究工作; 刘利国(1983),男,学士,高级工程师,主要从事配电设备运维检修工作; 杜渐(1987),男,硕士,工程师,主要从事电力系统规划及电力工程设计工作; 蔡超(1985),男,博士研究生,主要从事电力系统继电保护方面的研究工作。
  • 基金资助:
    国网江苏省电力有限公司科技项目“交直流混联配电网形态结构与适用场景研究及试点应用研究项目”(SGJSJY00GHJS1900076)

Comparison of Typical Configuration Characteristics and Application Mode of AC/DC Hybrid Distribution Network

HAN Jun1, YUAN Dong2, XIE Zhenjian1, HE Jinwei3, LIU Liguo2, DU Jian1, CAI Chao1   

  1. 1. Economic and Technical Research Institute,State Grid Jiangsu Electric Power Co., Ltd., Nanjing 210008, China; 2. State Grid Jiangsu Electric Power Co., Ltd., Nanjing 210024, China; 3. Key Laboratory of the Ministry of Education on Smart Power Grids(Tianjin University), Tianjin 300072
  • Online:2020-03-01
  • Supported by:
    This work is supported by Science and Technology Program of State Grid Jiangsu Electric Power Company(No.SGJSJY00GHJS1900076).

摘要: 作为未来配电网的重要发展方向,交直流配电网方面的研究目前仍处于初始阶段,关于未来交直流配电网形态特征与应用模式的研究还不够充分和全面。该文首先总结国内外对直流配电网典型拓扑结构的研究,并阐述影响拓扑选取的原则;其次,针对连接交、直流配电网的关键设备包括换流器、软开关(soft open point,SOP)、电力电子变压器(power electronic transformer,PET)的基本特征进行简要阐述;再次,从这三种交直流转换装置组网的角度出发,研究交直流配电网的形态特征及适合的应用模式;最后,对比基于三种不同互联装置的交直流配电网在设备组网形态、网架结构发展两方面的差异,为构建新型交直流配电网提供参考思路。

关键词: 交直流配电网, 换流器, 软开关(SOP), 电力电子变压器(PET)

Abstract: As an important development direction of the future distribution network, AC/DC hybrid distribution network is still in the initial research stage, and the research on the configuration characteristics and application mode of the future AC/DC distribution network is not comprehensive. This paper firstly summarizes the research on typical topologies of DC distribution network, and expounds the principles that influence the selection of topology. Secondly, the basic characteristics of the key equipment connecting AC and DC distribution network, including converter, soft open point and power electronic transformer, are briefly described. Thirdly, from the perspective of networking of these AC/DC conversion devices, the paper studies the configuration characteristics of AC/DC distribution network and the suitable application mode. Finally, the differences in equipment configuration and structure development of AC/DC distribution networks based on three different interconnection devices are compared. It provides a reference for constructing a new AC/DC distribution network.

Key words: AC-DC distribution network, converter, soft open point(SOP), power electronic transformer(PET)

中图分类号: