• CSCD核心库收录期刊
  • 中文核心期刊
  • 中国科技核心期刊

电力建设 ›› 2022, Vol. 43 ›› Issue (7): 113-120.doi: 10.12204/j.issn.1000-7229.2022.07.013

• 智能电网 • 上一篇    下一篇

多应用场景低压配网无缝合环转电解决方案

李俊林1, 韩捷1, 谢聪2(), 刘晓1, 张旭1, 王丹2   

  1. 1.广东电网有限责任公司广州供电局, 广州市 510620
    2.华中科技大学电气与电子工程学院, 武汉市 430074
  • 收稿日期:2021-12-30 出版日期:2022-07-01 发布日期:2022-06-30
  • 通讯作者: 谢聪 E-mail:jacobxcg@qq.com
  • 作者简介:李俊林(1991),男,硕士,工程师,研究方向为配网规划、运维;
    韩捷(1983),男,本科,高级工程师,研究方向为配网管理;
    刘晓(1987),男,本科,工程师,研究方向为配网管理;
    张旭(1988),女,硕士,工程师,研究方向为配网可靠性管理;
    王丹(1977),男,博士,教授,博士生导师,研究方向为大功率电力电子技术在电力系统中的应用。
  • 基金资助:
    南方电网公司科技项目(08200KK5219004)

Solutions for Seamless Closed-Loop Load Transfer of Low-Voltage Distribution Network in Multiple Application Scenarios

LI Junlin1, HAN Jie1, XIE Cong2(), LIU Xiao1, ZHANG Xu1, WANG Dan2   

  1. 1. Guangzhou Power Supply Co., Ltd., Guangzhou 510620, China
    2. School of Electrical and Electronic Engineering,Huazhong University of Science and Technology, Wuhan 430074, China
  • Received:2021-12-30 Online:2022-07-01 Published:2022-06-30
  • Contact: XIE Cong E-mail:jacobxcg@qq.com
  • Supported by:
    Science and Technology Project of China Southern Power Grid Corporation(08200KK5219004)

摘要:

合环转电作为一种重要的网络重构技术,对提高配电网运行的可靠性与经济性具有重要意义。常规合环转电不仅存在合环冲击,而且合环点的选取受到两侧电源相角差的限制。文章针对广州配电网存在的大角度差不停电转供技术难题,提出两种无缝合环转电解决方案,分别是基于串并联补偿的合环方案和基于背靠背拓扑的合环方案。它们能够适用于多种转供场景,并提供交、直流两种转供电源接口。文章给出了每种方案的接线方式,对它们的结构特点、性能参数以及工作原理进行了分析。为了适应配电网三相不平衡与谐波污染的运行环境,从结构与控制两方面提出了装置的改进措施。最后,仿真验证了几种典型场景下无缝合环转电装置的运行原理,从而为实际开展低压无缝合环转电提供计算支撑。

关键词: 合环转电, 低压配网, 不停电转供, 供电可靠性

Abstract:

As an important network reconfiguration technology, the closed-loop load transfer (CLLT) is of great significance to improve the reliability and economic efficiency of the distribution network. The conventional CLLT has a loop closing impact and the selection of loop closing point is limited by the phase angle difference between two substations. In this paper, two solutions are proposed to solve the technical problems of CLLT with the large angle difference in the Guangzhou distribution network, which are based on series-parallel compensation and back-to-back topology, respectively. They can be applied to a variety of scenarios and provide AC and DC interfaces. The wiring modes of these schemes are given, and their structural characteristics, performance parameters, and operating principles are analyzed. To adapt to the condition of three-phase imbalance and harmonic pollution, the improvement measures of the two schemes are proposed from the structure and control perspective. Finally, the operating principle of the seamless CLLT device in several typical scenarios is verified by simulation, thus providing computational support for the actual development of seamless CLLT.

Key words: closed-loop load transfer, low-voltage distribution network, uninterrupted power supply, power supply reliability

中图分类号: