• CSCD核心库收录期刊
  • 中文核心期刊
  • 中国科技核心期刊

ELECTRIC POWER CONSTRUCTION ›› 2014, Vol. 35 ›› Issue (1): 74-77.doi: 10.3969/j.issn.1000-7229.2014.01.014

Previous Articles     Next Articles

Selection Analysis of 600 MW Supercritical Anthracite-Fired Boiler

SUN Xianbin   

  1. Huaneng Clean Energy Research Institute Co., Ltd., Beijing 100098, China
  • Online:2014-01-01

Abstract:

In order to better solve the technical problems during the selection of anthracite-fired boiler such as ignition, stable combustion and burnout, the configuration and operation performance were analyzed and compared between 600 MW supercritical W shaped flame boiler and supercritical circulating fluidized bed (CFB) boiler combined with practical engineering application. The research results show that, W shaped flame boiler has good combustion performance when burning anthracite, but has higher concentration of NOx at furnace outlet, and high temperature corrosion problems of heating surface cannot be ignored. However, the NOx concentration at furnace outlet is relatively low and the combustion is stable for anthracite-fired CFB boiler, but the burning performance needs to be improved. It is suggested that supercritical CFB boiler should be preferred option for 600 MW anthracite-fired supercritical boilers, and it is necessary to improve the burning performance through reasonable technical way.

Key words: supercritical boiler, boiler type-selection, W shaped flame boiler, supercritical circulating fluidized bed (CFB) boiler, stable combustion, anthracite coal