• CSCD核心库收录期刊
  • 中文核心期刊
  • 中国科技核心期刊

ELECTRIC POWER CONSTRUCTION ›› 2020, Vol. 41 ›› Issue (10): 47-62.doi: 10.12204/j.issn.1000-7229.2020.10.006

Previous Articles     Next Articles

Typical Case Design of Distribution System Considering DG Integration

SUN Chongbo1, LI Jingru1, LUO Fengzhang2, YUAN Kai1, SONG Yi1, ZHANG Tianyu2   

  1. 1. State Grid Economic and Technological Research Institute Co.,Ltd.,Beijing 102209,China
    2. School of Electrical and Information Engineering, Tianjin University, Tianjin 300072, China
  • Received:2020-05-22 Online:2020-10-01 Published:2020-09-30
  • Supported by:
    National Key Research and Development Program of China(2016YFB0900100);National Natural Science Foundation of China(U1866207)

Abstract:

At present, there is a lack of unified and standardized typical examples for the scenario that distributed generation is widely connected to the distribution network in the future. Therefore, combined with the actual situation of China’s distribution network, three typical scenarios of rural, urban areas and industrial park are constructed. On this basis, the design principles and methods for typical scenarios are proposed. According to the load type, typical characteristics of distribution network, and the penetration rate of distributed generation, the distribution network examples in typical scenarios are designed, respectively, and the detailed parameters and typical daily data are given. At the same time, the analysis index and method for the example are given, and the detailed analysis and test are carried out from the perspective of over / low voltage test and distributed generation accommodation calculation. The results show the rationality and feasibility of the design example, which can provide a good case basis for the related research of distributed generation access.

Key words: distribution network, DG, PV, wind power generator, typical scenario, standard case

CLC Number: