[1]张洪麟,唐军,陈伟根,等. 基于有限元法的地下电缆群温度场及载流量的仿真计算[J]. 高压电器,2010,46(2):42-51.
ZHANG Honglin, TANG Jun, CHEN Weigen, et al. Simulation of temperature field and ampacity of underground cable system based on finite element method[J]. High Voltage Apparatus, 2010,46(2):42-51.
[2]徐元哲,王乐天,刘冬雪,等. 电力电缆接头测温系统的设计[J]. 高电压技术,2009,35(12):2977-2982.
XU Yuanzhe, WANG Letian, LIU Dongxue, et al. Design of temperature measurement system for power cable junction based on FBG[J]. High Voltage Engineering, 2009,35(12):2977-2982.
[3]杨文英. 电力电缆温度在线监测系统的研究[D]. 吉林:东北电力大学,2008.
YANG Wenying. Studying on the on-line temperature monitoring system for power cable[D]. Jilin: Northeast Dianli University,2008.
[4]杨延明. 基于有限元法的电力电缆载流量计算[D]. 哈尔滨:哈尔滨理工大学,2012.
YANG Yanming. Power cable ampacity calculation based on finite element method[D]. Harbin: Harbin University of Science and Technology,2012.
[5]珞灵琳. 单芯电缆暂态温度场及载流量实时计算方法的研究[D]. 重庆:重庆大学,2008.
LUO Linglin.Study on the transient-state temperature field and ampacity real-time caculation method of single core cable[D]. Chongqing: Chongqing University,2008.
[6]徐元哲,王乐天,高洪学,等. 电力电缆接头温度场分布的理论研究[J]. 电力系统保护与控制,2008,36(24):4-13.
XU Yuanzhe, WANG Letian, GAO Hongxue, et al. Theoretical study on temperature field distribution of power cable junction[J]. Power System Protection and Control, 2008,36(24):4-13.
[7]张德铭,梁明,王生明,等. 新型电力电缆接头故障检测系统的设计[J]. 电气应用,2005,24(1):29-31.
ZHANG Deming, LIANG Ming, WANG Shengming, et al. Design of new type power cable joint fault detection system[J]. Electrotechnical Application, 2005,24(1):29-31.
[8]王有元,陈仁刚,陈伟根,等. 有限元法计算地下电缆稳态温度场及其影响因素[J]. 高电压技术,2009,35(12):3086-3092.
WANG Youyuan, CHEN Rengang, CHEN Weigen, et al. Calculation of static temperature field of buried cable based on FEM and analysis of influential factors[J]. High Voltage Engineering, 2009,35(12):3086-3092.
[9]徐妍,王丽娜,李艳飞. 电缆温度场的有限元分析[J]. 黑龙江电力,2011,33(1):31-36.
XU Yan, WANG Lina, LI Yanfei. Analysis of temperature field of the cable based on FEM[J]. Heilongjiang Electric Power, 2011,33(1):31-36.
[10]于建立,常树生,牛远方,等. 地下电力电缆温度场及载流量的数值计算[J]. 东北电力大学学报,2008,28(4):62-65.
YU Jianli, CHANG Shusheng, NIU Yuanfang, et al. Numerical simulation of thermal fields and ampacity of underground power cables[J]. Journal Of Northeast Dianli University, 2008,28(4):62-65.
[11]董一夫. 110 kV XLPE电缆附件局部放电超高频检测及传输特性的研究[D]. 哈尔滨:哈尔滨理工大学,2014.
DONG Yifu. Partial discharge detection using ultra high frequency in 110 kV XLPE cable accessories and signal propagation properties[D]. Harbin: Harbin University of Science and Technology,2014.
[12]王磊,刘建国,严浩军,等. 基于有限元分析法的电缆中间接头温升仿真研究[J]. 上海电力学院学报,2014,30(5):428-432.
WANG Lei, LIU Jianguo, YAN Haojun, et al. Study of mechanism of temperature rise on power cable joint[J]. Journal of Shanghai University of Electric Power, 2014,30(5):428-432.
[13]吴畏,汪沨,黄智伟,等. 110 kV高压电力电缆中间接头电场-温度场的仿真分析[J]. 传感器与微系统,2011,30(8):15-21.
WU Wei, WANG Feng, HUANG Zhiwei, et al. Simulation analysis of electric-thermo field of 110 kV power cable joint[J]. Transducer and Microsystem Technologies, 2011,30(8):15-21.
[14]李巍巍,李建英,黄奇峰,等. 含不同缺陷电缆接头仿真分析[A]. 第十三届全国工程电介质学术会议论文集,2011.
LI Weiwei, LIU Jianying, HUANG Qifeng, et al. Simulation of cable joint with different kinds of defects[A]. Proceedings of the Thirteenth National Conference on Engineering Dielectric,2011.
[15]柳松,彭嘉康,陈守直,等. 高温对交联聚乙烯电缆/硅橡胶预制件接头界面压力影响的仿真研究[J]. 电线电缆,2014(1):10-13.
LIU Song, PENG Jiakang, CHEN Shouzhi, et al. Simulation of interfacial pressure between XLPE cable and silicon rubber prefabricated joint coupled with high temperature[J]. Electric Wire & Cable, 2014(1):10-13.
[16]陈庆国,秦艳军,尚南强,等. 温度对高压直流电缆中间接头内电场分布的影响分析[J]. 高电压技术,2014,40(9):2619-2626.
CHEN Qingguo, QIN Yanjun, SHANG Nanqiang, et al. Influence analysis of temperature on electric-field distribution in HVDC cable joint[J]. High Voltage Engineering, 2014,40(9):2619-2626.
[17]PILGRIM J A, SWAFFIELD D J, LEWIN P L, et al. An investigation of thermal ratings for high voltage cable joints through the use of 2D and 3D finite element analysis[C]//Electrical Insulation, 2008. ISEI 2008. Conference Record of the 2008 IEEE International Symposium on. IEEE, 2008: 543-546.
[18]中国电力企业联合会标准化中心. 电力工程电缆设计规范:GB 50217—2007[S]. 北京:中国计划出版社,2007.
[19]中国电力企业联合会.城市电力电缆线路设计技术规定:DL/T 5221—2005[S]. 北京:中国电力出版社,2005.
[20]Calculation of the current rating, part 1:current rating equations(100% load factor)and calculation of losses: IEC 60287-1 [S].2001.
[21]Calculation of the current rating, part 2:thermal resistance: IEC 60287-2 [S].2001.
[22]Calculation of the current rating, part 3: sections on operating conditions: IEC60287-3[S].1999.
[23]梁永春,柴进爱,李彦明,等. 有限元法计算交联电缆涡流损耗[J]. 高电压技术,2007,33(9):196-199.
LIANG Yongchun, CAI Jinai, LI Yanming, et al. Calculation of eddy current losses in XLPE cables by FEM [J]. High Voltage Engineering, 2007,33(9):196-199. |