Valve Loss Calculation of Converter Based on Thermal Model and Junction Temperature Iteration Method

doi:10.3969/j.issn.1000-7229.2015.09.015

Abstract

Abstract:

The converter valve is a key component of Ultra High Voltage Direct Current system. The power loss calculation has attached great importance to the system design and radiator selection. The power loss of valve is coupled with the modulation strategies and categories of power electronic devices. It is difficult to calculate the power loss of valve accurately. In order to solve this problem, a power loss calculation method based on equivalent thermal model and junction temperature iteration method is proposed in this paper. Based on the analytical analysis of power loss, improved software is developed to calculate the power loss of valve. The commercial loss calculation software proposed by ABB is also introduced. And it is used to verify the effectiveness of power loss calculation method. At last, the relationship between power loss and operating parameters is obtained, which provides guidance for the designation of valves and radiator.

Key words: converter valve, loss calculation, thermal model, temperature iteration

CLC Number:

TM 755

XU Bin, XIE Zhujun, XIANG Wang, ZHOU Guoliang, WEN Jinyu. Valve Loss Calculation of Converter Based on Thermal Model and Junction Temperature Iteration Method[J]. ELECTRIC POWER CONSTRUCTION, 2015, 36(9): 88-95.

References

［1］胡航海, 李敬如, 杨卫红, 等.柔性直流输电技术的发展与展望［J］.电力建设，2011, 32（5）：62-66.
Hu Hanghai, Li Jingru, Yang Weihong, et al. The development and prospect of hvdc flexible technology. ［J］. Electric Power Construction, 2011, 32（5）：62-66.
［2］汤广福, 贺之渊, 庞辉. 柔性直流输电工程技术研究、应用及发展［J］. 电力系统自动化, 2013, 37(15): 3-14.
Tang Guangfu, He Zhiyuan, Pang Hui. Research, application and development of VSC-HVDC engineering technology［J］. Automation of Electric Power Systems, 2013，37(15)：3-14.
［3］张静, 孙维真, 费建平,等. MMC-HVDC 的稳态运行范围研究［J］. 电力建设, 2015, 36(3): 1-6.
Zhang Jing, Sun Weizhen, Fei Jianping, et al. Steady-state operating range of MMC-HVDC［J］. Electric Power Construction, 2015, 36(3): 1-6.
［4］刘军娜，赵成勇，李广凯. 二极管箝位式三电平VSC损耗分析［J］. 电力自动化设备，2011，31(4)：96-99.
Liu Junna, Zhao Chengyong, Li Guangkai. Power loss analysis of diode-clamped three-level VSC［J］.Electric Power Automation Equipment, 2011，31(4)：96-99.
［5］毛鹏，谢少军，许泽刚.IGBT 模块的开关暂态模型及损耗分析［J］.中国电机工程学报，2010，33(15)：40-47.
Mao Peng, Xie Shaojun, Xu Zegang. Switching transients model and loss analysis of IGBT module［J］.Proceedings of the CSEE，2010，33(15)：40-47.
［6］Hefner A R.Dynamic electro-thermal model for the IGBT［J］.IEEE Transactions on Industry Applications，1994，30(2)：364-405.
［7］屠卿瑞, 徐政. 基于结温反馈方法的模块化多电平换流器型高压直流输电阀损耗评估［J］. 高电压技术, 2012, 38(6): 1506-1512.
Tu Qingrui, Xu Zheng. Dissipation analysis of MMC-HVDC based on junction temperature feedback method［J］. High Voltage Engineering, 2012, 38(6): 1506-1512.
［8］ABB 5SNA 1200E330100 Data Sheet ［EB/OL］.Lenzburg Switzerland：ABB Switzerland Ltd. （2013-05-20）［2015-08-10］.http://www.Abb.com/product/zh/9AAC30200001. aspx?country=CN.
［9］ABB. Applying IGBTs ［EB/OL］.Lenzburg Switzerland：ABB Switzerland Ltd.（2012-08-13）［2015-08-10］.https: //library.e.abb.com/public/ab119704d4797bc283257cd3002ac5e0/Applying%20IGBTs_5SYA%202053-04.pdf
［10］刘建涛，王治华，王珂. 不同结构电压源换流器损耗对比分析［J］. 电力系统保护与控制，2013，41(6)：105-110.
Liu Jiantao, Wang Zhihua, WANG Ke. Comparative analysis of losses of voltage source converters with different structures［J］.Power System Protection and Control，2013，41(6)：105-110.
［11］Floricau D，Floricau E，Gateau G. Three-level active NPC converter：PWM strategies and loss distribution［C］//34th Annual Conference of IEEE Industrial Electronics Society.Orlando，USA：IEEE，2008：3333-3338.
［12］Rahimo M，Kopta A，Schnell R，et al.High-power modules with soft-punch through IGBT technology for traction application［J］.Proceedings of PCIM03， Nürnberg，2003.
［13］吴锐, 温家良,于坤山, 等. 不同调制策略下两电平电压源换流器损耗分析［J］. 电网技术, 2012, 36(10): 93-98.
Wu Rui, Wen Jialiang, Yu Kunshan, et al. Analysis on power dissipation in two-level voltage source converters under different modulation strategies［J］. Power System Technology, 2012, 36(10): 93-98.〖LL〗〖JP4〗［14］罗德荣，宋辉，姬小豪，等. SVPWM策略下VSC-HVDC换流器损耗计算［J］. 电力电子技术，2015，49(3)：12-15.
Luo Derong，Song Hui，Ji Xiaohao，et al. Calculate power losses of VSC-HVDC converter under SVPWM strategy［J］. Power Electronics, 2015, 49 (3): 12-15.
［15］吴锐, 温家良, 于坤山, 等. 电压源换流器开关器件损耗建模［J］. 中国电机工程学报, 2012, 32(21): 1-7.
Wu Rui, Wen Jialiang, Yu Kunshan, et al. Power loss modeling of switching devices in voltage source converters［J］. Proceedings of the CSEE, 2012, 32(21): 1-7.
［16］熊妍，沈燕群，江剑，等. IGBT损耗计算和损耗模型研究［J］. 电源技术应用，2006，9(5)：55-60.
Xiong Yan, Shen Yanqun, Jiang Jian, et al. Study on loss calculation and model for IGBT［J］. Power Supply Technologies and Applications，2006，9(5)：55-60.
［17］潘武略，徐政，张静，等.电压源换流器型直流输电换流器损耗分析［J］.中国电机工程学报，2008, 28(21): 7-14.
Pan Wulue, Xu Zheng, Zhang Jing, et al. Dissipation analysis of VSC-HVDC converter ［J］.Proceedings of the CSEE，2008，28(21)：7-14.

[1]	YANG Yong， SHE Zhenqiu， SONG Shengli， LI Ming，WANG Jialong，FAN Jichao. Design Optimization of Converter Valve Thyristor for New Generation of ±800 kV/8 GW UHVDC Project [J]. Electric Power Construction, 2020, 41(6): 114-122.
[2]	WANG Huafeng, WEI Xiaoguang,ZHENG Lin,HAO Changcheng,ZHANG Haifeng,LIN Zhiguang. Online Monitoring Technology of Thyristor Level of HVDC Converter Valve [J]. Electric Power Construction, 2016, 37(10): 61-.
[3]	LIU Xinyang, JIN Xi, LI Yanan, JIANG Weiyong, PU Ying. Main Circuit and Main Wiring Study of Parallel Converters in HVDC Transmission System [J]. ELECTRIC POWER CONSTRUCTION, 2015, 36(9): 50-56.
[4]	ZHA Kunpeng, WANG Gaoyong, GAO Chong. Upgrading Technology of UHVDC Converter Valve Test Capability [J]. ELECTRIC POWER CONSTRUCTION, 2015, 36(9): 62-68.
[5]	ZHANG Yunxiao, LI Cunjun， PU Ying, DING Yigong, MA Yulong, LU Yajun . Interface and Test of UHVDC Control System and Valve Control System [J]. ELECTRIC POWER CONSTRUCTION, 2015, 36(9): 78-82.
[6]	ZHENG Lin, LAN Yuanliang, GAO Yangming, LIU Ning, YANG Xiaonan, PENG Ling. Design and Implementation of Valve Control System in ±660 kV HVDC Power Transmission Project [J]. ELECTRIC POWER CONSTRUCTION, 2014, 35(2): 47-51.
[7]	ZHANG Xiangyu, WEN Boying, LI Peng. Research and Development of Computing Platform for Main Circuit Parameters in HVDC Power System [J]. ELECTRIC POWER CONSTRUCTION, 2014, 35(2): 52-56.
[8]	ZHA Kunpeng, GAO Chong，TANG Guangfu, YANG Jun. Design and Test of Thyristor Valve for Southern Hami-Zhengzhou ±800 kV/5000 A UHVDC Transmission Project [J]. ELECTRIC POWER CONSTRUCTION, 2014, 35(12): 54-60.
[9]	GUO Xianshan, QIE Xin, ZENG Jing. Research and Application of General Design for ±800 kV Converter Station [J]. ELECTRIC POWER CONSTRUCTION, 2014, 35(10): 36-42.
[10]	WANG Huafeng，CHEN Longlong，LIN Zhiguang，ZHENG Lin，TANG Guangfu. Working Principle and Application of Control and Protection System for Converter Valve in ±800 kV UHV DC Power Transmission Project [J]. ELECTRIC POWER CONSTRUCTION, 2013, 34(4): 32-36.
[11]	YANG Wankai，ZENG Nanchao，LIU Fei. Analysis of Converter Valve Control VBE-RDY Null Value Fault in Jinsu UHVDC Project [J]. ELECTRIC POWER CONSTRUCTION, 2013, 34(10): 107-111.
[12]	. Working Principle and Application of Converter Valve Control System in ±660 kV HVDC Transmission Project [J]. ELECTRIC POWER CONSTRUCTION, 2011, 32(7): 21-24.
[13]	. Structure Design of Converter Valve for ±660 kV HVDC Transmission Project [J]. ELECTRIC POWER CONSTRUCTION, 2011, 32(7): 16-20.