PDF(3196 KB)
MMC Reliability Modeling Considering Time-Varying Failure Rate and Renewal Process of Redundant System and Its Application
WU Kecheng, WANG Fengxue, WU Han, QU Yi, DONG Hong, OUYANG Sen
Electric Power Construction ›› 2022, Vol. 43 ›› Issue (8) : 102-112.
PDF(3196 KB)
PDF(3196 KB)
MMC Reliability Modeling Considering Time-Varying Failure Rate and Renewal Process of Redundant System and Its Application
In view of the problem that the existing research on reliability of modular multi-level converter (MMC) does not fully consider time-varying failure rate of redundant system, and lacks the evaluation method for renewal process, which can not scientifically measure the reliability of MMC, this paper proposes an MMC reliability modeling method considering the time-varying failure rate and N-step renewal process of redundant system. Firstly, from the perspective of redundancy degree and redundancy mode, the classification of redundant systems is refined. According to the classification above, the mathematical analytical relationship between reliability and failure rate is established, which indicates the characteristics of the time-varying failure rate of redundant system. It is pointed out that the failure rate of redundant system obtained by traditional methods is too small. Then, N-step failure rate is used to replace the time-varying failure rate of MMC redundant system. At the same time, the renewal process theory is introduced to deduce the mean time to failure (MTTF) and steady-state availability formula of MMC, so as to correct the problem that the calculation results of traditional methods are too high. Finally, the converter of half-bridge sub-module is taken as an example to verify the effectiveness and feasibility of the proposed method.
reliability modeling / redundant system / N-step renewal process / modular multi-level converter (MMC) / time-varying failure rate
| [1] |
曾嘉思, 徐习东, 赵宇明. 交直流配电网可靠性对比[J]. 电网技术, 2014, 38(9): 2582-2589.
|
| [2] |
冯玎, 林圣, 张奥, 等. 基于连续时间马尔可夫退化过程的牵引供电设备可靠性预测方法研究[J]. 中国电机工程学报, 2017, 37(7): 1937-1946.
|
| [3] |
杨墨缘, 欧阳森, 张真, 等. 考虑不同运行状态的多端口直流断路器可靠性模型[J]. 电网技术, 2021, 45(10): 4037-4049.
|
| [4] |
刘文霞, 徐雅惠, 李乔乔, 等. 考虑载荷状态不确定性的柔性多状态开关可靠性模型[J]. 中国电机工程学报, 2019, 39(6): 1592-1602, 1856.
|
| [5] |
刘文霞, 刘鑫, 王荣杰, 等. 含柔性多状态开关的多端互联配电系统可靠性评估与量化分析[J]. 高电压技术, 2020, 46(4): 1114-1124.
|
| [6] |
段军, 谢晔源, 姜田贵, 等. 模块化多电平换流阀可靠性研究与设计优化[J]. 电力工程技术, 2018, 37(2): 38-43.
|
| [7] |
丁明, 王京景, 宋倩. 基于k/n(G)模型的柔性直流输电系统换流阀可靠性建模与冗余性分析[J]. 电网技术, 2008, 32(21): 32-36, 41.
|
| [8] |
刘满君, 江轶, 罗金山, 等. 基于灵敏度分析的柔性交直流电网可靠性提升方法[J]. 电力建设, 2018, 39(2): 58-67.
|
| [9] |
王秀丽, 郭静丽, 庞辉, 等. 模块化多电平换流器的结构可靠性分析[J]. 中国电机工程学报, 2016, 36(7): 1908-1914.
|
| [10] |
黄守道, 付雪婷, 饶宏, 等. 基于Semi-Markov的模块化多电平换流器的可靠性分析及其冗余配置策略[J]. 电力自动化设备, 2018, 38(7): 128-133.
|
| [11] |
许家友. 模块化多电平换流器可靠性评估[D]. 广州: 华南理工大学, 2019.
|
| [12] |
王希平, 李志刚, 姚芳. 考虑任务剖面的模块化多电平换流器可靠性评估方法研究[J]. 中国电机工程学报, 2021, 41(7): 2495-2507.
|
| [13] |
高崇, 曾广璇, 张俊潇, 等. 基于成功流法的配电信息物理系统可靠性评估[J]. 电力建设, 2020, 41(5): 58-64.
|
| [14] |
程林, 何剑. 电力系统可靠性原理和应用[M]. 2版. 北京: 清华大学出版社, 2015.
|
| [15] |
陈柱. 可修复温储备系统维修策略改进下的可靠性分析[D]. 重庆: 重庆大学, 2013.
|
| [16] |
李红霞. 几个可修系统的可靠性分析[D]. 秦皇岛: 燕山大学, 2008.
|
| [17] |
徐桂云, 张晓光. 提升机安全制动通道全冗余的恒力矩液压站的研制[J]. 同煤科技, 2020(5): 1-4, 69.
|
| [18] |
马瑶. 基于不确定寿命的贮备冗余系统可靠性分析[D]. 天津: 天津科技大学, 2018.
|
| [19] |
|
| [20] |
|
| [21] |
刘亚春, 曹远龙. 延时可修系统的可靠性分析与计算[J]. 南华大学学报(自然科学版), 2021, 35(1): 64-66, 76.
|
| [22] |
汲国强, 张伯明, 吴文传, 等. 一种适用于可靠性评估的电网设备时变停运模型[J]. 中国电机工程学报, 2013, 33(1): 56-62.
|
| [23] |
沈吉锋, 张永志, 宋朝河, 等. 基于马尔科夫更新过程的侦察系统可靠性分析[J]. 兵工自动化, 2010, 29(3): 7-9.
|
| [24] |
|
| [25] |
|
| [26] |
邓帅荣. 基于元件和设备的中低压直流配电网可靠性评估[D]. 重庆: 重庆大学, 2017.
|
| [27] |
马文·劳沙德. 系统可靠性理论: 模型统计方法及应用[M]. 郭强, 王秋芳, 刘树林, 译. 2版. 北京: 国防工业出版社, 2010.
|
/
| 〈 |
|
〉 |